Compak K-8 User Manual

K-5
K-6
K-8
K-8
K-10 Conic
K-10 Conic
molinos de café
moulins à café
kaffeemühlen
macinadosatori
moinhos de café
к о ф е м о л к и
μαδοι αδσησ καε
coffee grinders
Instructions Manual
K-5 / K-6 / K-8 / K-10 Conic
12
12
Declaration of EC Conformity
In accordance with European commu-
nity directives, quality certi cates have
been applied.
All materials have been adapted and
technical reports are available at our
of ces.
89/336/EC
on the approximation of
the laws of the Member States relating
to electromagnetic compatibility.
91/368/EC
amending Directive 89/
392/EC on the approximation of the
laws of the Member States relating to
machinery.
93/68/EC
amending Directives 87/
404/EC (simple pressure vessels),
88/378/EC (safety of toys), 89/106/EC
(construction products), 89/336/EC
(electromagnetic compatibility),89/
392/EC (machinery), 89/686/EC (per-
sonal protective equipment), 90/384/
EC (non-automatic weighing instru-
ments), 90/385/EC (active implantable
medicinal devices), 90/396/EC (appli-
ances that burn gaseous fuels), 91/
263/EC (telecommunications terminal
equipment), 92/42/EC (boiler-burning
systems using liquid or gaseous fuels)
and 73/23/EC (electrical equipment
designed for use within certain voltage
limits).
73/23/EC
on the harmonization of
the laws of Member States relating to
electrical equipment designed for use
within certain voltage limits.
98/37/EC
on the approximation of the
laws of the Member States relating to
machinery.
89/109/EC
on the approximation of
the laws of the Member States relating
to materials and articles intended to
come into contact with foodstuffs.
03/108/EC
amending Directive 2002/
96/EC on waste electrical and elec-
tronic equipment (WEEE).
93/44/EC
amending Directive 89/392
/EC on the approximation of the
laws of the Member States relating to
machinery.
Environment
Do not throw the appliance
away with the normal
household waste; hand
it in at an of cial recycling
collection point. By doing
this, you will help to
preserve the environment.
The Legal Representative

Compak K-8 Specifications

General

Burr Type	Flat
Burr Size	83 mm
Motor Power	730 W
Grind Settings	Stepless
Voltage	230 V
Dimensions	215 x 400 x 635 mm
Frequency	50/60 Hz
Grinding Speed	18-20 g/sec

Summary

EC Conformity Declaration

Environmental Responsibility

Information regarding proper disposal of the appliance and environmental preservation.

Product Description

Manual Instructions

Purpose of the Manual

Explains the manual's objective: providing information for correct installation, handling, and maintenance.

Understanding Manual Terms

Details conventions used in the manual, like bold text and icons, for clarity.

Machine Identification Plate

Technical Characteristics

Intended Use

Defines the scope of application for the coffee grinders, specifying authorized usage.

External Components Overview

Installation Procedures

General Installation Warnings

General warnings for installers regarding machine installation and safety guidelines.

Operator Safety Precautions

Important warnings for the operator during grinder handling and operation.

Grinder Placement Requirements

Specifies minimum dimensions and surface requirements for optimal grinder performance.

Pre-Installation Checks

Essential checks before connecting the grinder to the power supply.

Grinder Regulation

Initial Grinder Setup

Steps for preparing the grinder, including hopper assembly and setting roller adjustment.

Adjusting Coffee Serving Size

Instructions on how to regulate the amount of ground coffee dispensed per serving.

Grinder Operation

How to Use the Grinder

Detailed steps on operating the grinder for grinding and dispensing coffee.

Cleaning Procedures

General and Exterior Cleaning

Guidelines for general machine cleaning and exterior surface maintenance.

Internal Parts Cleaning

Instructions for cleaning the coffee bean hopper and ground coffee deposit.

Maintenance Instructions

Maintenance Safety Warnings

Critical warnings to be observed before performing any maintenance work.

Regular Maintenance Schedule

Recommendations for routine inspections and part wear checks for optimal performance.

Grinding Group Servicing

Detailed steps for maintaining the grinding group, including burr cleaning and adjustment.

Safety Measures