Compak K3 TOUCH - Operation Modes and Settings; Adjusting Dose for K3 Models; Portafilter Holder Clip Adjustment; Using the K3 PUSH Model

ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 25/03/2014 | K01070
12
K3 TOUCH / K3 TOUCH ADVANCED
On the K3 TOUCH / K3 TOUCH ADVANCED models, the grind time is pre-set at the
factory to grind 7 grams of coffee in 6-7 seconds.
To adjust the grind time, simply turn the timer knob (
) found on the front of the
grinder (Fig. 5 and 6). Turning clockwise will increase the grind time, and turning the
knob counter-clockwise decrease the grind time. The numbers on the dial correspond
with motor run time in seconds.

Itispossibletolowerorraisetheportalterholderclip( ) using the Allen Key
2,whichwillaccommodatethevastmajorityofportaltersfoundonthemarket
(Fig. 7).
9. OPERATION
K3 PUSH
The main power switch on the K3 PUSH ( ) has 3 positions, I - 0 - II (Fig. 8).
I
Continuous grind.
0 Off.
II
Push Mode which will grind while the front activation panel (
) is pushed
inwiththeportalter.