Compak F8 OD - 10.2. Configuration of the grinders main menu

17
K06315 | v. 21/07/2015 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS
* (only for models with possibility to offer three doses).
Automatically the icon of the desired dose icon and the icon will change to active
colorandthefourtimenumberswillthenbegintoash.
There are two ways to modify the time:
• Press the icons or on the LCD screen and the time will increase, and press
the icon to decrease the time.
• Also, the time can be changed by using the lower dose button ( ) or the icon
( ) found on the LCD screen ( ). If any of these options are pressed, the grinder
will begin to run and the time, starting at zero, will increase until the chosen
button is released.
10.2.Congurationofthegrinder’smainmenu
To enter the conguration menú, press the icon. Once in the menu, use the
buttons ( , or )totogglethroughthemenuoptions,andconrm/choosethe
desired option with the button. Press the icon to return to the previous
option.
Toexitthemenú,pressthearrowbuttonuntilthemainmenuscreenisreached,or
simply press nothing for 8 seconds and the menu will reset to the beginning.
Through the conguration menu, it is possible to modify the following grinder
features: