Compal Notebook - Page 61

Set Supervisor
Password
Power on Password [Enabled]
Set User Password
HDD Password Status No Accessed
Set HDD Password
following
Help Information
F1
Help
↑↓
Select Item
F5/F6 Change
Values
F9 Setup
Defaults
Esc
Exit
←→ Select
Screen
Enter Select
4SubMenu
F10 Save and
Exit
TPM status
Show the TPM status:“Enable and Active” or “Disable or Deactive”. This option only
show on TPM unit.
TPM Operation
Enable/Disable TPM function. This option will automatically return to NO-Operation.
This option only show on TPM unit.
TPM Force clear
This item will show when the TPM Operation be set “Enable and Active”, use to
enable/disable TPM Force Clear function. This option only show on TPM unit.
Supervisor Password
Show the Password status: Clear or Set
User Password
Show the Password status: Clear or Set
Set Supervisor/ HDD Password
Install or Change the password.
Power on Password
Enable or disable the Power on Password. You only can enable/disable Power on
password after the Supervisor password is set.