8
1
LIGHTING THE STOVE
Make sure the Control Knob is set to the “OFF” position.
Step 1. Depress and turn the Control Knob anti-clockwise until a “click”
sound is heard, check that the burner is now alight if so hold the
ignition knob in for 10 to 15 seconds then release.
Step 2. If burner is not alight, return the Control Knob back to the “OFF”
position, allow the excess gas to disperse then repeat ignition
process.
ADJUSTING FLAME
Turn the gas control in an anti-clockwise direction to achieve a higher flame
and in the clockwise direction for a lower flame or fully clockwise to turn the
appliance “OFF”.
2
To Next Page