R
EPLACING AN
E
XPANSION
C
ARD
11
VII. Checking To See If the Replacement Part Is
Installed Properly
1. Reconnect the power cord to the electrical outlet and
computer.
2. Turn on the computer to verify that the replacement part is
properly installed.
3. If the problem persists, repeat the Removing and
Replacing procedures.
4. If you are still experiencing problems, contact Compaq
Support: 1-800-984-9350.
VIII. Returning the Defective Part
Please refer to the Compaq Part Return Instructions that came
with your replacement part for instructions on returning the
defective part.
To Next Page
Loading...
