Compaq 5000 Series User Manual

End-User Replaceable Parts Program
Replacing the DVD-RAM Drive
5000 and 7000 Series

Compaq 5000 Series Specifications

General

Memory Type	SDRAM
Optical Drive	CD-ROM or DVD-ROM
Audio	Integrated
Operating System	Windows 98
Ports	USB, Serial, Parallel, PS/2
Expansion Slots	PCI

Summary

Preparation and Tools

Computer Disassembly Preparation

Outlines essential steps before disassembly, including removing disks and disconnecting power/peripherals.

Disconnecting System Power

Procedure for Power Disconnection

Step-by-step instructions on how to safely shut down the computer and disconnect power cords.

Opening the Side Access Panel

Accessing the Computer Interior

Locating and Removing the DVD-RAM Drive

Identifying the DVD-RAM Drive

Disconnecting Drive Cables

Details on disconnecting power, data, and optional audio cables from the drive.

Releasing the Drive from the Chassis

Steps to press side rails and pull the drive out of the chassis.

Replacing the DVD-RAM Drive

Attaching Drive Rails to New Drive

Inserting the New Drive

Steps for sliding the replacement drive into the computer until rails snap into place.

Reconnecting Drive Cables

Instructions for reconnecting power, data, and audio cables to the new DVD-RAM drive.

Replacing the Side Access Panel

Securing the Side Panel

Verifying Proper Installation

Reconnecting Power and Peripherals

Powering On and Testing

Instructions to turn on the computer and verify the successful installation of the replacement part.