14
3. Press 2 to access the Define LD screen. This screen allows you to configure RAID settings and assign-
ments.
4. Use the arrow keys to scroll to the desired LD number and press Enter. The following screen appears.
RAID 1 configurations should accept HP default settings. For all other configurations:
• Use up and down arrow keys to toggle and the space bar to view and change options.
•Under Assignment, select Y to enable the drive(s).
•Press Ctrl + Y to save your settings.
• At the prompt, press Ctrl + Y to Modify Array Capacity or press any other key to use maxi-
mum capacity.
•Press Esc to exit and return to the main menu.
5. Press Esc to exit. At system prompt, press Y to reboot or any other key to go back.
To Next Page
Loading...
