Need help?Do you have a question about the Compaq Evo D510 e-pc and is the answer not in the manual?
General| Chipset | Intel 845G |
|---|---|
| Memory Slots | 2 DIMM slots |
| Graphics | Integrated Intel Extreme Graphics |
| Audio | Integrated audio |
| Form Factor | Small Form Factor |
| Processor | Intel Pentium 4 |
| Hard Drive | 40 GB |
| Optical Drive | CD-ROM, DVD-ROM, or CD-RW |
| Network | 10/100 Ethernet |
| Expansion Slots | 1 PCI |
| Ports Front | 2 USB 2.0 |
| Ports Rear | 4 USB 2.0, 1 Serial, 1 Parallel, 1 RJ-45, Audio in/out |
| Ports | USB 2.0, serial, parallel, VGA, PS/2, RJ-45, audio |
| Operating System | Windows XP Professional |
Connect the monitor, mouse, keyboard, and network cables to the personal computer.
Instructions for connecting power cords to the computer and monitor, including voltage selection.
Steps to turn on the PC and complete the initial operating system installation process.
Manually select or change monitor settings like brand, model, refresh rates, and resolution.
Keep backup copies of system software and applications to prevent data loss.
Restore original operating system and factory-installed software using the provided CD.
Register your PC with Compaq to receive product announcements and updates.
Properly shut down the operating system and turn off the computer's power.
Compaq's commitment to designing user-friendly and accessible products.
Find additional information, software, and driver updates on the Compaq website.
This chapter covers basic troubleshooting; a comprehensive guide is on the Compaq website.
General suggestions for resolving minor computer, monitor, or software problems.
Methods to resolve common issues like computer not turning on or incorrect date/time.
Guidance on reconfiguring the computer when adding or removing hardware.
Important safety warnings and guidelines for replacing the computer's internal battery.
Step-by-step instructions for safely removing the existing coin cell battery.
Instructions for inserting a new battery and completing the replacement process.
Detailed technical specifications including weight, dimensions, acoustic noise, and power supply.
Information on unique Compaq series numbers for regulatory compliance and identification.
FCC compliance statement for Class B digital devices and measures to correct interference.
FCC rules regarding user modifications to the device and potential voiding of operating authority.
FCC compliance statement for mice, subject to specific conditions.
Requirements for using shielded cables with metallic RFI/EMI connector hoods for compliance.
FCC compliance statement for products marked with the FCC logo.
Statement of compliance with Canadian Interference-Causing Equipment Regulations.
French translation of the Canadian Notice regarding interference-causing equipment.
Compliance with EMC and Low Voltage Directives for CE marking.
Notice regarding VCCI standards for Class B digital equipment in Japan.
Information on Compaq products meeting EPA Energy Star guidelines for energy efficiency.
Compliance with German safety regulations for display workplaces.
Safety precautions and compliance for Class 1 laser products.
FDA regulations for laser products manufactured in the US.
Compliance of CD-ROM drives with safety standards like IEC 825.
Explanation of the CLASS 1 LASER PRODUCT label found on the system.
Technical specifications for the laser device, including type, wavelength, and output power.
Requirements for power cord sets, including voltage rating, wire gauge, and length.
To Next Page
