7
Charge Your Compaq iPAQ Pocket PC
1 Insert the Compaq iPAQ
Pocket PC Companion
CD-ROM
2 Follow the instructions on the
screen for installing
Microsoft ActiveSync 3.5
For more help, click on the
Microsoft ActiveSync 3.5 Help
button during installation
3 Locate the cradle
4 Insert the AC adapter plug
into the DC jack on the back
of the cradle
5 Attach either the USB or
serial cable to your computer
6 Slide the bottom of your
Compaq iPAQ Pocket PC into
the cradle and push firmly
Microsoft ActiveSync 3.5
installation will resume
7 Select the information to
synchronize with your Com-
paq iPAQ Pocket PC
The information you select will
automatically synchronize when
your installation is complete
8 Leave your Compaq iPAQ
Pocket PC in the cradle until
the light stops blinking and
the battery is charged
The setup of your Compaq iPAQ
Pocket PC is now complete
9 Go to the Companion
CD-ROM to install extra soft-
ware to enhance your
Compaq iPAQ Pocket PC
Charge Your Compaq
iPAQ Pocket PC
Charge your Compaq iPAQ
Pocket PC on a regular basis with
the AC adapter or the cradle.
Charge with the cradle
Charge your Compaq iPAQ
Pocket PC with the cradle. Use the
cradle to
GS 5x3.book Page 7 Wednesday, September 5, 2001 1:28 PM
To Next Page
Loading...
General