4 REPLACING THE HARD DRIVE
I. Preparing Your Computer For Disassembly
1. Remove any diskette or compact discs (CDs) from the computer.
2. To shut down your computer, click the Start button, and then click Shut Down. The Shut Down Windows
dialog box is displayed. Select Shut Down from the drop-down list and click OK to turn the computer off.
3. Disconnect all peripheral device cables from the computer.
4. Disconnect the power cord from the electrical outlet 1 and computer 2 (see Figure 1-2).
Figure 1-2
Failure to disconnect the power from the computer may result in personal injury.
Warning
To Next Page
Loading...
