REPLACING THE HARD DRIVE 5
II. Opening the Side Access Panel
1. Locate the latch 1 on the back of the computer and press down on the lever to release the side panel. Grab the
handle on the side panel and slide the side panel from the chassis 2 (see Figure 2-1).
Figure 2-1
m Caution: Before doing any work inside your computer, ground yourself by touching a metal part of the chassis.
Note: Should the latch fail to move
when pressed downward, check to
see if there is a shipping screw above
the latch. If so, remove the screw.
To Next Page
Loading...
