English81188
♦♦♦
English - 11
NUTEK VESA state LED indicator Power Consumption
Normal operation On Green < 130W
Power Saving
Position A1
Suspend Amber < 15W
Power Saving
Position A2
Off Amber < 8W
Energy Declaration
This monitor is equipped with a function for saving energy that supports the VESA
Display Power Management Signaling (DPMS) standard. This means that the
monitor must be connected to a computer that also supports the VESA DPMS
standard to fulfill the requirements of the NUTEK specification 803299/94. The
time settings for switching to a power saving mode are adjusted from the system
unit by software. From the first indication of inactivity to power saving position A2,
the total time must not be set to more than 70 minutes.
1. VESA Power-Management Proposal 2. Power Consumption (120/230 Vac)
CONTROLS AND ADJUSTMENTS
VESA DPMS Standard
H. sync V. sync Video State
Off On Blank Stand-by
On Off Blank Suspend
Off Off Blank Off
According to TCO guidelines, the optimum TCO readings are measured when brightness
and contrast are adjusted to their center position.
<100/W
1Bk-en.p65 7/27/98, 3:04 PM11
To Next Page
