test failed
104 - 02 Interrupt controller slave
test failed
104 - 03 Interrupt controller software
RTC is inoperative
105 - 01 Port 61 bit 6 not at zero
105 - 02 Port 61 bit 5 not at zero
105 - 03 Port 61 bit 3 not at zero
------------------------------------------------------------------------------
Error
Code Description Recommended Action
------------------------------------------------------------------------------
105 - 04 Port 61 bit 1 not at zero Replace the system board and retest
for error codes 103 - xx through
105 - 05 Port 61 bit 0 not at zero 114 - xx.
105 - 06 Port 61 bit 5 not at one
105 - 07 Port 61 bit 3 not at one
105 - 08 Port 61 bit 1 not at one
105 - 09 Port 61 bit 0 not at one
105 - 10 Port 61 I/O test failed
105 - 11 Port 61 bit 7 not at zero
105 - 12 Port 61 bit 2 not at zero
106 - 01 Keyboard controller self
test failed
107 - 01 CMOS RAM test failed
108 - 02 CMOS interrupt test failed
------------------------------------------------------------------------------
Error
Code Description Recommended Action
------------------------------------------------------------------------------
108 - 03 CMOS interrupt test, CMOS Replace the system board and retest
not properly initialized for error codes 103 - xx through
114 - xx.
109 - 01 CMOS clock load data test
failed
109 - 02 CMOS clock rollover test
failed
To Next Page
Loading...
Need help?
General