can be added in combinations of 1 and 4 megabytes.
NOTE: The following table does not represent all possible configurations.
Memory boards can be installed in any combination and in any available slot.
Table 5-2. Memory Expansion Alternatives - COMPAQ SLT/286 Personal Computer
==============================================================================
System Memory Memory Board(s) Added to Slot 1, 2, or 3 Total Memory
------------------------------------------------------------------------------
640 KB 1 MB 1.6 MB
640 KB 1 MB 1 MB 2.6 MB
640 KB 1 MB 1 MB 1 MB 3.6 MB
640 KB 4 MB 4.6 MB
640 KB 1 MB 4 MB 5.6 MB
640 KB 1 MB 1 MB 4 MB 6.6 MB
640 KB 4 MB 4 MB 8.6 MB
640 KB 1 MB 4 MB 4 MB 9.6 MB
640 KB 4 MB 4 MB 4 MB 12.6 MB
==============================================================================
Chapter 5.8 LED INDICATOR BOARD
1. Remove the chassis, section 5.6.
2. Remove the memory shield, section 5.7.
CAUTION: THE LED INDICATOR BOARD WILL FALL OUT OF THE ALUMINUM MEMORY SHIELD
ONCE THE SCREWS ARE REMOVED.
Removing the LED Indicator Board from the COMPAQ SLT 386s/20
Use a Torx T-10 to remove the two black, low profile screws that secure the
LED indicator board to the memory shield.
To Next Page
Loading...
