Compaq SLT/286 - Page 26

403 - 01 Printer pattern test failed
498 - 00 Printer failed or not connected
==============================================================================
Table 3-6. Diskette Drive Test Error Codes
==============================================================================
Error
Code Description Recommended Action
------------------------------------------------------------------------------
600 - xx Diskette ID drive types The following steps apply to error
test failed codes 600 - xx through 610 - xx:
601 - xx Diskette format failed 1. Replace the diskette and retest.
2. Check and/or replace the power
602 - xx Diskette read test failed and signal cables and retest.
3. Replace the diskette drive and
603 - xx Diskette write, read, compare retest.
test failed 4. Replace the system board and
retest.
604 - xx Diskette random seek test
failed
605 - xx Diskette ID media failed
606 - xx Diskette speed test failed
607 - xx Diskette wrap test failed
608 - xx Diskette write protect test
failed
609 - xx Diskette reset controller
test failed
------------------------------------------------------------------------------
Error
Code Description Recommended Action
------------------------------------------------------------------------------
610 - xx Diskette change line test The following steps apply to error
failed codes 600 - xx through 610 - xx:
610 - 01 Exceeded maximum soft error 1. Replace the diskette and retest.
limit 2. Check and/or replace the power
and signal cables and retest.
610 - 02 Exceeded maximum hard error 3. Replace the diskette drive and
limit retest.
4. Replace the system board and
610 - 03 Previously exceeded maximum retest.
soft error limit
610 - 04 Previously exceeded maximum
hard error limit
610 - 05 Failed to reset controller