Compaq SLT 386s/20 - Page 33

1719 - 09 Failed to format a track
1719 - 10 Failed sector wrap test
1719 - 19 Controller failed to
deallocate bad sector
------------------------------------------------------------------------------
Error
Code Description Recommended Action
------------------------------------------------------------------------------
1719 - 40 Failed cylinder 0 The following steps apply to error
codes 1700 - xx through 1799 - xx:
1719 - 41 Drive not ready
1. Replace the fixed disk drive
1719 - 42 Recalibrate failed signal and power cables and
retest.
1719 - 43 Failed to format bad track 2. Replace the fixed disk drive and
retest.
1719 - 44 Failed fixed disk controller 3. Replace the system board and
diagnostics retest.
1719 - 45 Failed to get drive
parameters from ROM
1719 - 46 Invalid drive parameters
found in ROM
1719 - 47 Failed to park heads
1719 - 48 Failed to move disk table
to RAM
1719 - 49 Failed to read media in
file write test
------------------------------------------------------------------------------
Error
Code Description Recommended Action
------------------------------------------------------------------------------
1719 - 50 Failed file I/O write test The following steps apply to error
codes 1700 - xx through 1799 - xx:
1719 - 51 Failed file I/O read test
1. Replace the fixed disk drive
1719 - 52 Failed file I/O compare test signal and power cables and
retest.
1719 - 53 Failed drive/head register 2. Replace the fixed disk drive and
test retest.
3. Replace the system board and
1719 - 54 Failed digital input register retest.
test
1719 - 55 Failed cylinder 1
1719 - 56 Fixed disk drive controller