VII.5 : Initializing of the control box
After you have wired the control box according to the wiring
diagram, you start by initializing the control box. Follow the next
steps:
Use pushbuttons T1 and T3 to scroll up and down.
To confirm your choice use pushbutton T2 (= enter).
To enter the Menu use pushbutton T4. Use T4 also to return to the
previous step.
STEP1 : Display A: Enter the menu
STEP2 : Display B: Select language
Push T4 (MENU)
Select your language and confirm with T2
To Next Page
Loading...