Comprehensive CHE-1 - Receiver Panel

7
Link LED
8
When the transmitter is connected to HDMI
source, the LED will be on.
DC 5V
DC 5V power supply port.
5.2 Receiver Panel
IR IN DC 5VCAT
HDMI OUT
No. Function DescriptionName
1
HDMI OUT
2 IR IN
Power LED3
Connect to IR receiver cable, the IR signal
will emit to the IR OUT port of the transmitter.
CAT
CAT input port. Connect to the CAT output
port of the transmitter with CAT5E/6 cable
.
4
5
Link LED
6
When the receiver is connected to HDMI
source, the LED will be on.
DC 5V
DC 5V power supply port.
When the receiver is powered on, the LED
will be on.
HDMI signal output port. Connect to HDMI
display device such as HDTV.
5/7