23
Message Description
OPER. INTERRUPTED
This message is displayed if the ALTERNATE key has been pressed to interrupt a
park procedure.
PARKING
The printer is parking the fanfold paper.
PATH CHANGING
The path has been changed and the printer is updating the settings.
PRESS A KEY
NVM CHANGED
The NVM has been changed. Press any key to set the printer.
RELEASE KEYS
This message is displayed when you can release the ON LINE key in the Self-test
selection or the
PROGRAM key in the Power-on Configuration procedure.
REMOTE CONTROL
This message is displayed when the printer operates from remote control (only if
the LAN interface is present).
RESET & BREAK
This message is displayed when the input buffer corresponding to the active
interface is cleared.
SELF TEST
Printing the self-test page.
TEAR IF NECESS.
EJECT PAPER
These messages are displayed when the printer receives a paper parking
command and the TEAR NO item is selected for the tear-off function. Tear off the
fanfold then press the
PARK key to eject the paper.
TEAR IF NECESS.
PARK PAPER
These messages are displayed when the printer receives a paper parking
command. Tear off the fanfold paper if necessary and then press the
PARK key
to park the paper.
To Next Page
Loading...
