89
Print Impact Strength
TEAR DELAY 1
↑
STRONG IMPACT
→ or ←
SOFT IMPACT
→ or ←
↓
PERFOR. SAFE NO
STRONG IMPACT
The impact strength of the print head is set for printing on multicopy paper.
SOFT IMPACT
The impact strength of the print head is set for printing few copies.
The printing noise is reduced.
Paper Perforation
This function allows to move the print head aside the paper when the fanfold paper perforation passes
between the mylar and the print bar, to facilitate paper movement on critical forms.
STRONG IMPACT
↑
PERFOR. SAFE NO
→ or ←
PERFOR. SAFE YES
→ or ←
↓
QUIET PRINT OFF
PERFOR. SAFE NO
The function is disabled. The print head remains in its position, when the
perforation of the paper passes.
PERFOR. SAFE YES
The function is enabled. The print head is moved aside, when the perforation
passes.
To Next Page
Loading...
