Computherm q3rf - Page 27

PRODUCT INFORMATION DATA SHEET:
• Trademark:
• Model identier: Q3RF
• Temperature control class: I. class
• Contribution to the e󰀩ciency of seasonal space heating: 1%
Remark:
In addition to using modern temperature regulators, the following up-to-date regulation
methods also contribute signicantly to the improvement of the comfort provided by
the heating network, the energy e󰀩ciency of the heating network and the coe󰀩cient of
performance:
• By dividing the heating network into sections or zones (e.g. by means of
COMPUTHERM Q4Z zone controller and the associated COMPUTHERM zone
valves) and with their separate regulation we can ensure that every room
(zone) is heated only when it is necessary. (You can obtain information on the
establishment of the heating network and apparatuses and fittings needed for
division into zones in our publication titled „Energy Savings and Comfort”
which is also available on our website www.computherm.info).
• Using programmable thermostats you can ensure that every room (zone) is just
heated according to a timetable preset in accordance with the demands. (You can
obtain information on the services provided by COMPUTHERM Q7; Q7RF and Q8RF
programmable room thermostats on our website).
• Using modern modular heating devices equipped with an external temperature sen-
sor the boiler can be operated at a higher e󰀩ciency.
• Using low temperature heating networks (e.g. 60/40 °C) and condensing boilers
the temperature of the ue gas leaving the boiler can be reduced, and this way fuel
e󰀩ciency can be improved signicantly.