Computherm Q3 - User Manual

COMPUTHERM Q3
digital room thermostat
Operating Instructions
You can watch the most important aspects of the usage of this thermostat on our video
presentation at www.computherm.info

Computherm Q3 Specifications

General

Display	LCD
Temperature Measuring Accuracy	±0.5 °C
Temperature Setting Accuracy	±0.5 °C
Control Type	On/Off
Protection Class	IP30
Programming	Yes
Voltage	230V AC
Switching Voltage	230V AC
Switching Current	3A
Mounting	Surface mounting

Summary

GENERAL DESCRIPTION OF THE THERMOSTAT

LOCATION OF THE DEVICE

INSTALLATION OF THE THERMOSTAT

PUTTING THE THERMOSTAT INTO OPERATION

BASIC SETTINGS

Selecting the Displayed Temperature

Allows selection and setting of displayed temperature using the left jumper.

Selecting the Switching Sensitivity (Accuracy)

Configures thermostat sensitivity (±0.2°C or ±0.1°C) via central jumper.

Switching between the Heating and Cooling Mode

Selects heating or cooling mode using the right jumper.

Calibration of the thermometer of the thermostat

Allows calibration of the thermometer using an orange potentiometer for temperature correction.

OPERATION OF THE INSTALLED THERMOSTAT

Economy Mode (() (left hand position of the switch)

Sets the thermostat to maintain a lower economy temperature for energy saving.

Comfort Mode (☆) (right hand position of the switch)

Sets the thermostat to maintain a higher comfort temperature for user convenience.

SETTING THE DESIRED TEMPERATURE

BATTERY REPLACEMENT

FREQUENTLY ASKED QUESTIONS

PRODUCT INFORMATION DATA SHEET

TECHNICAL DATA