Computherm Q3 - LOCATION OF THE DEVICE

4
The simultaneous use of several COMPUTHERM room thermostats and
one COMPUTHERM Q4Z zone controller provides the possibility for
the thermostats to also control a pump or a zone valve in addition to
starting the heater or cooler. This way it is easy to divide a heating
/ cooling system into zones, thanks to which the heating / cooling
of each room can be controlled separately, thus greatly increasing
comfort. Furthermore, the zoning of the heating / cooling system will
greatly contribute to the reduction of energy costs, as due to this only
those rooms will be heated / cooled at any time where it is required.
1. LOCATION OF THE DEVICE
It is reasonable to locate it in a room used regularly or for many hours
per day so that it is in the direction of natural ventilation in the room
but protected from drought or extreme heat (e.g. direct sunlight,
refrigerator, chimney, etc). Do not use in wet, chemically aggressive
or dusty environment. Its optimal location is 0,75-1.5 m above oor
level.