Computherm q3rf - User Manual

COMPUTHERM Q3RF
wireless (radio-frequency) digital
room thermostat
Operating Instructions
You can watch the most important aspects of the usage of this thermostat on our video
presentation at www.computherm.info.

Computherm q3rf Specifications

General

Temperature Measurement Accuracy	±0.5 °C
Display	LCD
Programmable	Yes
Type	Wireless
Voltage (receiver)	230V AC
Temperature Measurement Range	0°C to 40°C
Switching Voltage	230V AC
Power Supply	2x AA batteries

Summary

Location of the Device

Putting the Thermostat into Operation

Basic Settings

Selecting the Displayed Temperature

Selecting the Switching Sensitivity (Accuracy)

Switching between Heating and Cooling Mode

Calibration of the Thermometer

Synchronising the Thermostat and Receiver Unit

Establishes a secure wireless connection between the thermostat and receiver using safety codes.

Operation of the Installed Thermostat

Setting the Desired Temperature

Battery Replacement

The Receiver Unit

Installation and Connection of the Receiver Unit

Details the process of mounting and wiring the receiver unit to the heating or cooling system.

Putting the Receiver Unit into Operation

Guides on powering up the receiver and initiating the automatic tuning process for wireless communication.

Transmission Distance Inspection

Manual Control of the Receiver Unit