EasyManua.ls Logo

Computherm q3rf - Basic Settings

Computherm q3rf
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
the housing. Insert 2 AA alkaline batteries (LR6 type) in
accordance with the diagram in the battery compartment.
Warning! Alkaline batteries may only be used for this
appliance. Carbon-zinc batteries known as durable or long
life batteries and chargeable accumulators are not suitable
for the operation of this appliance. Icon
appearing on
the display to indicate low battery voltage warns reliably
that the batteries should be replaced only when alkaline
batteries are used.
After the batteries have been inserted, the display ashes
the measured room temperature. (If this information fails to
appear on the display, press the „RESET” button located on
the main panel of the thermostat.
3. BASIC SETTINGS
After removing the rear panel of
the device, the following factory
default settings can be modied
by relocating the jumpers (black
- 8 -

Related product manuals