16
the set comfort temperature (e.g. daytime temperature) to be
maintained at the place where the thermostat has been installed.
6. SETTING THE DESIRED TEMPERATURE
After putting the thermostat into operation and adjusting the basic
settings the thermostat is ready for operation and the adjustment of
the temperature can be started.
For energy eciency it is recommended that the comfort temperature
is only used those times, when the room or building is in use,
because every 1 °C decrease of temperature saves approximately
6% energy during a heating season.
The factory default temperature is 18 °C for the economy (
w
) position
and 20 °C for the comfort (
☼
) position. These default temperatures
can be changed as follows:
To Next Page
Loading...
