17
• Move the switch according to the temperature you would like to
change (economy (
w
) or comfort (
☼
)).
• Press the or button, after which the notice “ROOM”
disappears, the notice “SET” (adjusted value) appears in the
bottom right corner of the display. Meanwhile, the temperature
value shown on the display switches from room temperature
to the default temperature (18.0 °C/20.0 °C) or to the last set
temperature (this temperature is blinking on the display). By
pressing the buttons repeatedly or continuously (the change in
values is accelerated), the desired temperature to be maintained
at the place where the thermostat has been installed can be set in
steps of 0.5 °C.
• Approximately 6 seconds after setting the room temperature to be
maintained, the device automatically switches to normal mode.
The notice “SET” disappears from the bottom right corner of the
To Next Page
Loading...
