10
measured room temperature value, while the notice “ROOM”
appears in the bottom right corner of the display. In this case, the
adjusted temperature is visible only during the adjustment process,
for approximately 6 seconds after the last button has been pushed.
By relocating the plug onto the bottommost and central pins the
displayed temperature can be modied so that the display alternately
shows the current room temperature and the adjusted temperature
for 3-3 seconds, respectively. In this mode, the notices “ROOM”
and “SET” are alternately shown under the currently displayed
temperature in the bottom right corner of the display, indicating
whether the display shows the room temperature or the adjusted
temperature value.
4.2 Selecting the Switching Sensitivity (Accuracy)
The switching sensitivity of the thermostat can be selected by the
central jumper, which determines how much below/above the set
To Next Page
Loading...
