- 31 -
5.1 Temperature modication until the next program
switch
Set the required temperature using the large and
buttons on the front panel of the device. After the
temperature modification the program number disappears,
and the icon appears on the display, indicating that the
thermostat is operated with manual control. The device will
control the boiler according to the set value until the time of
the next switch specied in the program is reached.
During this temporary modification, the segments indicating
the time on the display alternately show the exact time
(TIME) and the time remaining in manual control (TIME
LEFT, for example , that is 4 hours and 2 minutes).
After this time has elapsed, the icon disappears and
the device resumes the program that has been set. If you
wish to return to the set program before the time of the next
switch is reached, please press the “SET” button.
To Next Page
Loading...
