- 38 -
9. RESETTING THE THERMOSTAT TO I
FACTORY DEFAULT SETTINGS
By pressing the “RESET” button located on the main panel
of the thermostat, the thermostat can be reset to its factory
default settings. This results in deleting the day, exact time,
basic settings and the set program. After resetting the
device, adjust the basic settings of the thermostat again and
create the new program, as described in Chapters 2 and 3.
10. THE RECEIVER UNIT
10.1 Installation and connection of the receiver unit
WARNING! The device must be installed and connected
by a qualied professional. Before installing, make sure
that that neither the thermostat nor the device to be con-
trolled is connected to the 230 V mains voltage. Modify-
ing the thermostat can cause electric shock or product
failure.
The receiver unit should be mounted on the wall in a place
protected against moisture, dust, chemicals and heat, in the
vicinity of the boiler.
To Next Page
Loading...
