Computime S-990 - Preparation for Settings; Function Setting Procedures

-
8
-
30
30
30
30 Setting the time of 12
th
group of ringing
31
31
31
31 Adjusting Printing position (up/down)
32
32
32
32 Detecting front/back of card
33
33
33
33 Setting the Monthly, Weekly pay period ending day
34
34
34
34 Setting the S/W solstice start （ month and day ）
35
35
35
35 Setting the S/W solstice start （ hour and minute ）
36
36
36
36 Setting the S/W solstice end （ month and day ）
37
37
37
37 Setting the S/W solstice end （ hour and minute ）
3
3
3
3 .
.
.
. Be
Be
Be
Be ready
ready
ready
ready for
for
for
for setting
setting
setting
setting
1 . Power Supply
(1) Stable power source is highly recommended.
(2) Please check the correct voltage & power cord before use.
2. T op Cover
Remove the top cover prior to set program or
change the ribbon case
Open the t op c over by using the key provided
and remove the top cover.
4
4
4
4 .
.
.
. Function
Function
Function
Function Setting
Setting
Setting
Setting
After removing the lid from the time recorder,
turn the program switch to right side to enter setting condition. Press “ Enter ” to
select the codes forward or press “ Back ” to select backward for functions
setting expected and, press “ + ” to increase the value or press “ － ” to decrease
the value and, press “ Enter ” to save the set value and start the next setting.