Need help?Do you have a question about the Comrex BRIC-Link and is the answer not in the manual?
Details BRIC-Link applications and available audio compression modes.
Discusses full-duplex operation, jitter buffer management, and coding delays.
Identifies rear/front panels, pinouts for audio and serial connections.
Describes DIP switch functions and the factory reset procedure.
Explains how to establish connections using the Switchboard server.
Details how the BRIC-Link handles incoming calls.
Guides on firmware updates and network access recovery.
Describes login process and outlines main interface sections.
Details Connections, Dashboard, and Performance tabs for managing remotes and monitoring.
Explains Codec Channel, CrossLock fields, Packet Loss, and Utilization graphs.
Guides on creating, building, and configuring connection profiles.
Covers device-wide system configurations including Security, Connections, and Modes.
Overview of network settings and Ethernet port configuration.
Managing network configurations and advanced Ethernet options.
Explains CrossLock functionality and connections to MultiRack.
Describes the procedure of making and receiving connections via the Switchboard server.
Steps for manually adding, backing up, and connecting/disconnecting remotes.
Important considerations for manual CrossLock setup.
Guide to account creation, user management, and contact lists.
Performing actions on multiple codecs within a contact list simultaneously.
Configures BRIC-Link for continuous operation and backup connections.
Describes various audio encoding algorithms, their characteristics, and use cases.
Describes G.722 as a medium fidelity algorithm for VoIP compatibility.
Explains Multistream setups and the role of CrossLock for stability.
Guides on setting up IP Multicast, profiles, and port numbers.
Enables and configures the BRIC-Link as an HTTP streaming server.
Covers EBU3326/SIP modes, server registration, and call procedures.
Discusses advanced SIP settings and common connection issues.
Details software licenses and copyright notices used in the BRIC-Link.
Provides disclaimers regarding the Switchboard Traversal Server service and its availability.
Certifies compliance with FCC Rules and ACTA technical criteria.
Details compatibility settings for Luci Live, Zephyr Xstream, and Standard RTP streams.
Guides on configuring BRIC-Link for unidirectional connections using Standard RTP.
Lists open ports and services for incoming and outgoing network connections.
Describes setup for BRIC Normal and manual CrossLock connections to MultiRack.
General| Ethernet Ports | 1 |
|---|---|
| USB Ports | 1 |
| Power | 12V DC |
| Audio Codecs | AAC-LD |
| Headphone Output | 1 |
| Sample Rates | 48 kHz |
To Next Page
