Comtek RK7106 - Operation Instruction and Function Illustration

17 18
Digital display Standby is in status showing balance working time when the air
pressure is in ON mode press Intensity air pressure intensity shows
If there is error code, then it shows auto code, balance working time and error code in turn.
Auto code. A0, Demo. A1,fatigue recovery. A2.pain relieving. A3,comfort mood.
: “--” ,
“” , “”,:
M
a
s
s
a
g
em
e
t
h
o
d
Legrestupanddownillustration
Air pressure position
4-roller massage
machine position
In automatic mode it shows
orange green blue in turn
，
,, .
Backrest up and down illustration
Air massage
strength
The massage chair is turning
off. Do not press any key in
case of causingproblem..
It means the massage chair is
detecting your body before
massage start.
Auto
Custom
Returning...Bodydetecting...
Overall
Shoulder
Back
Waist
Point
Width
Speed
Strength
Volume
Manualcontrol
VFD display illustration
Massage operation
W
M
N
Kneading
Knocking
Shiatsu
Tapping
Auto Auto massage
Custom Manual massage
Massage width bar
Massage
barStrength
Width
Returning…
Body detecting…
Volume
Overall
Shoulder
Back
Waist
Point
To play music in Non-music sync mode,
press 4 times to increase grade. On
the contrary press 4 times to decrease
1 grade.In music sync mode, you can also
increase or lower the volume, though you
see the tone of music inthe display.
Music sync
Voice
1
Operation instruction and function illustration
Step2.Massage
1.Choose therelevant massagemethodaccording
tocontroller operation.Please refertoController
Instruction.
2.Massagetimeup,massagestops,andmassage
chair returntonormalposition, controller shows
if there is no operation in minutes
display close and massage chair goes to
standby status
“==”,2,
,
.
Step3.Switchoff.
1.InONstatus,press On/Offkey onthecontroller
toturnoffthemassagechair.
2. Afterthe chair returns switch off the button
behind the power case
3.Unplugthepowerline.
,
.
3
3
Massage
operation
Power on/off
2
On/Off
b
a
1
2
4
Step1. Switch On.
1 Put controller plug in socket a.
2. Put the power cable in socket b.
3. Put electricity plug in socket.
4. Switch on the button behind the power case,
the controller shows standby status
if you don t operate it in 2 minutes, it goes to
low power consumption. You can press ON to
start, the massage chair remains in standby.
5. Press ON button on the controller.
“--” ,
'
1.Beforeuse,removethepillowandback
padtomakesurethereisnodamage
orbreakageinmaterialonthebackor
otherpart.,ifthereisanydamage,
pleasestopoperatingandaskfor
repairment.
2.Putthepluginpropersocket.
Warning!
A
ttention!
1.Beforeuse,makesurethereisnostuff
pinchedbetweenarmrest,legrestor
seat.
2.Makesurethemassagechairisin
returnstatusbeforesittingonit.
3.Whenusingthemassagechair,do
notstandonit.
5
On/Off
On/Off