Comtek RK7106 - The Adjustment before Massage

11 12
b
a
1
2
3
4
c
d
I
n
s
t
a
l
l
a
t
i
o
n
Installation
Installation（4）
Step 6. After installation
After installation, please follow the steps below:
Insert the plug of remote control and power into
the power box in bottom (as picture)
Is for remote control
Is for power plug
a
b
Insert the other end of power plug into the outlet.
Turn on the power switch
Power switch means on
Press keys on remote control to choose massage
program to enjoy the massage.
（“ .）O/,“ ”
c Playingmusic,insertudiscwithMp3in.
d Usingearphone,insertplugin.
I” I
1
2
3
4
Step 5 Sorting out the zipper and snap fastener
Connect the back cushion, pillow with back.
Kind suggestion
Sittingonthechair,trytokeepthebottomof
pillowandearinthesameline,thenconnect
itwithbackinthisposition.Itwillmakebody
detectionmoreaccurateandprovidebetter
massage.
Connect back
and back cushion
with zipper
Connectpillow
andbackwith
snapfastener
Pillow
Back cushion
Back
5
Please make sure that the power switch is at
the OFF position before inserting the plug
into the socket
“”
.
The adjustment before massage
Caution
Environment
Check environment
Don’t use the chair in wet places liks near
swimming pool , bath room to avoid lea-
kage or electric shock.
Don’t use under sunlight or near stove
or other heating place to avoid upho-
lstery deteriorated.
Please use chair in flat place to avoid
chair falling or noise or other unexpected
trouble.
Check places in front
Check the areas when back and leg extending,
make sure no people, pets or other things
around.
Check power cable, plug
Space size for using the chair
Atleast40cmfromwall.
(1) Clean the dust on plug on time.
(using dry cloth).
(2) No damage, re-do, bend, stretch, tie or
press with heavy thing(especially can’t
be pressed by the chair) on power cable.
Check
Atleast50cminfrontoftheleg.
Check surroundings
Whenthebackrestorlegrestreclinesor
extends,pleasepayattentionto:
(1) Check any person or things in every
direction.
(2) Check the space size.
M
a
ssa
ge o
pe
ration