To Next PageTo Next Page
Need help?Do you have a question about the Comunello Automation RAM 220 and is the answer not in the manual?
Instructions for skilled personnel, proper use, gate construction, manual storage, and statutory compliance.
Ensure all required devices, use only after commissioning, and dispose of packaging materials.
No modifications, avoid liquids, keep away from heat, battery storage, earth connection, and power disconnect for maintenance.
Reversible electromechanical operator with telescopic rod, rugged die cast aluminium, available in 24V or 230V.
Diagram showing typical installation layout with key components and reference figures.
Verify component condition, gate suitability, environment, material, gate movement, clearance, and anchorage.
Ensure correct operator sizing for gate dimensions and leaf limits based on specifications.
Choose component positions, connection layout, and list required components for installation.
Steps for mounting the operator, including rear and front plate fixation and rod coupling.
Ensure gate has mechanical limit stops as operator lacks electronic ones.
Procedure to open the gate manually by releasing the gear mechanism.
General| Motor voltage | 230 V |
|---|---|
| Max thrust | 2200 N |
| Protection level | IP44 |
| Voltage | 230 V |
| Protection Rating | IP44 |
| Operating temperature | -20°C to +55°C |
