To Next PageTo Next Page
Need help?Do you have a question about the Comunello CU-24V-1M and is the answer not in the manual?
Configures gate opening direction for FORT mode, specifying left or right movement.
Configures gate opening direction for SALIENT mode, specifying left or right movement.
Key advice for users on safe operation, maintenance, and potential hazards of the control unit.
Verifying product condition and site readiness, followed by physical installation procedures.
Pinout and wiring guide for all control unit terminals (CN1-CN5) and inputs/outputs.
Introduction to the unit's core operational modes like automatic closing, step-by-step, and safety inputs.
Adjusting operator run times, deceleration points, and force for opening and closing cycles.
Procedures for programming, deleting, and managing remote control transmitter codes.
Enabling and configuring automatic gate closing and the automatic programming function.
Enabling and testing the photocell safety system for reliable operation.
Configuring pedestrian motor time and the ability to disable deceleration.
Setting functions for smooth gate release and secure lock engagement during closing.
Activating warning lights before movement and courtesy lighting after opening.
Enabling gradual acceleration and deceleration for smoother gate movement at start and end.
Modifying safety input DS1 to function during gate opening for enhanced safety.
Configuring manual gate control and automatic re-closing logic after user passage.
Enabling flashing lights during pauses and automatic closing after power outages.
Selecting one of seven power levels to control deceleration force during gate movement.
Step-by-step guide to reset the control unit to its default factory configuration.
Performing tests on photocells and input signals to identify and resolve system faults.
Information on the 24-month warranty, what is covered, and how to make a claim.
General| Brand | Comunello |
|---|---|
| Model | CU-24V-1M |
| Category | Control Unit |
| Language | English |
