To Next PageTo Next Page
Need help?Do you have a question about the Comunello CU-230V-1M and is the answer not in the manual?
Identifies the manufacturer, address, and product description.
Lists the EU directives the equipment complies with.
Lists the harmonized technical standards applied.
Declaration regarding compliance with the Machinery Directive.
Installer responsibility to provide a sectioning device.
Recommendations for cable types, cross-sections, and wiring separation.
Notes on wall mounting, panel drilling, and IP rating.
User age/ability limits and safety instructions.
Diagram showing power supply and motor connections.
Details for CN1 and CN2 terminal blocks.
Wiring diagram for the transformer connections.
Functions of SLOW and FORCE trimmers.
Table specifying wire connections and lengths.
Notes on cable standards and sizing for parallel connections.
Specifications for power supply, outputs, and operating temperature.
Specifications for radio frequency, memory, board dimensions, and fuses.
Connection diagram and setting for FORT motor.
Connection diagram and configuration note for SALIENT motor.
Wiring diagram for double motor SALIENT installation.
Description of ABACUS and EAGLE motors with vector/radial motion.
Wiring diagrams for ABACUS and EAGLE motor connections.
How to navigate and access MAIN and EXTENDED menus.
Description of functions available in the main menu.
Description of functions available in Extended Menu 1.
Description of functions available in Extended Menu 2.
Detailed description of terminal blocks and transformer connections.
Overview of automatic, step-by-step, and other operational modes.
Procedure for photocell testing and failure mode.
Details on connecting and using opening/closing limit switches.
How to use a timer for automated gate operation.
How to adjust the motor deceleration speed.
How to adjust the motor power using the FORCE trimmer.
Explanation of SELECT and SET key functions in programming.
Detailed steps for programming main menu functions.
Procedure to enable the 'Open to Left' logic.
Procedure to set 'Automatic Open-Close' logic.
Steps to store and delete remote control codes.
How the first saved remote affects subsequent programming.
Procedure to enable the Condominium function.
Setting motor stroke times and deceleration points.
Procedure to enable and set automatic closing time.
Steps for automatic programming of stroke and decelerations.
Procedure to access and select functions in Extended Menu 1.
Specific functions like Phototest, Pedestrian Time, Brake, etc.
Procedure to access and select functions in Extended Menu 2.
Specific functions like Soft Stop, Soft Start, Hold-to-Run, Follow Me.
How to reset the control unit to factory default settings.
Functional test of connected photocells during operation.
Checking the status of low voltage command inputs via LEDs.
General provisions, validity period, and installation compliance.
List of failures and damages not covered by the warranty.
Procedure for claims, notification, and legal jurisdiction.
General| Brand | Comunello |
|---|---|
| Model | CU-230V-1M |
| Category | Control Unit |
| Language | English |
