• Only use clean cold water for filling this appliance. In hard water
areas, we recommend the use of distilled water.
• Always keep the hose and nozzle elevated above the water
container.
• Before unit is turned on, the hose must be extended, and then
place it in the hook.
• Do not place the steam nozzle directly onto any surface or on the
appliance power cord while it is hot or plugged in.
• Use caution when changing the attachments, as they may have
hot water or condensation on them from the nozzle. Attachments
should never be placed on the nozzle when in use or preheating.
Always ensure the steamer is switched off and the nozzle has
cooled down before changing the attachments.
• Attachments may get hot during use. Allow them to cool before
storing.
• When emitting steam, this appliance may cause burns if it is used
too close to the skin or eyes, or if it is used incorrectly. To reduce
the risk of contact with hot water emitting from the steam vents,
test appliance before use by holding it away from the body.
• Do not steam garments while on a person.
• Burns could occur from touching hot metal parts, hot water or
steam. Use care when you turn steam appliance upside down
– there may be hot water in the reservoir.
• Use caution when carrying steamer, as it contains hot water.
• Hose will be hot when in use. Avoid prolonged contact to avoid
burns.
To Next Page
Loading...
Need help?
General
