STEAMER ASSEMBLY
The garment steamer comes in several parts:
1. Telescopic pole
2. Extendable telescopic pole
3. One metal rod with pant clip system
4. Two grooved plastic connectors (one is attached to the base of the
steamer and the other is attached to the metal rod with pant clip
system)
5. One round plastic connector/storage hook
6. One 360˚ rotatable hanger with pant clip system
7. 2-in-1 lint and bristle brush attachment
8. Press attachment
9. One double insulated hose + cool touch handle + triangular shaped
nozzle
NB - The metal rod with pant clip system (3.) is attached to the
telescopic pole (1.). Ensure you remove the metal rod with pant
clip system (3.) from the telescopic pole (1.) before assembling
the steamer.
4
9
7
8
6
3
21 5
4
To Next Page
Loading...
