Conair CGS18A User Manual

Assembling the Telescopic Pole, Pant Clip System and 360°
Rotatable Hanger
Step.1 Unscrew existing grooved connector from the base of the
steamer (Fig.A) and place aside.
Step.2 Insert telescopic pole (1.) (with open hole facing down) into
receptacle in base of the steamer (Fig.B). Slide the pole into the
base of the steamer and twist into place, and then push the
pole down as far as it can go, until it clicks into place.
Step.3 Slide grooved connector back onto the steamer by sliding over
the top of the pole.
NB - the larger circle of the grooved connector should be facing
down.
Slide to the bottom of the pole and then screw tightly into
place (Fig C).
(Fig.C)
(Fig.B)
(Fig.A)

Conair CGS18A Specifications

General

Brand	Conair
Model	CGS18A
Category	Steam Cleaner
Language	English