Conair CGS18A User Manual

Step.4 Take the metal rod with pant clip system (3.) and unscrew the
grooved connector. Place grooved connector aside. (Fig.D)
Step.5 Place the metal rod with pant clip system over the top of the
pole on the garment steamer.
NB - The pant clips on the metal rod should be at the back of
the garment steamer.
Slide the metal rod down the pole until it is positioned in the
middle (Fig.E).
Step.6 Place the grooved connector over the top of the pole, holding
the metal rod in place.
NB - The larger circle of the grooved connector should be facing
down.
Slide the grooved connector down onto the pole and over the
top of the plastic. Tightly screw the grooved connector in place,
while still holding the metal rod. This will secure the metal rod
with pant clip system to the pole. (Fig.F.)
(Fig.F)
(Fig.D)
(Fig.E)

Conair CGS18A Specifications

General

Brand	Conair
Model	CGS18A
Category	Steam Cleaner
Language	English