Conair CGS18A User Manual

Step.7 Insert the round plastic connector/storage hook (5.) onto the
top of the pole on the garment steamer. (Fig.G)
NB – The round hook should be facing the front of the garment
steamer.
Push the round plastic connector down the pole until it cannot
be pushed down any further.
Step.8 Take the extendable telescopic pole (2.) and unclip the black
plastic clip (Fig.H). Extend the pole as far as required and secure
desired height by closing the black plastic clip. (Fig.I)
Step.9 Place the extendable telescopic pole (with open hole facing
down) into the top of the round plastic connector already on
the garment steamer. Align the pole and then lightly push
down into place. (Fig.J)
(Fig.G)
(Fig.H)
(Fig.I)
(Fig.J)

Conair CGS18A Specifications

General

Brand	Conair
Model	CGS18A
Category	Steam Cleaner
Language	English