• Step off Scale and it will shut off in 10 seconds automati-
cally. If you stay on the scale for a long time, then the scale
will shut off in 15 seconds automatically.
2.2 Personal data setting mode:
Note: In this mode, if scale is not keyed for 30 seconds,
scale will turn off automatically.
2.2.1 Set User ID
Tap on the scale and wait until “0.0” appears; press Set button,
default “P-1” will appear and blinks
• Use the Up/Down button to select a user number, once
the desired user number (P-1 to P-10) appears, press “SET”
button to confirm.
2.2.2 Setting Start Weight:
• Then “0.0” appears. Step on the scale. Start weight
indicated by start weight symbol “ ” appears.
• Press “SET” button to confirm.
To Next Page
Loading...
