9
XT YT
The working depth is set by altering the
position of the rear roller supports.
• Slacken A
• Remove B and reposition the support
• Tighten all bolts
• Repeat for both sides
A
B
Side Shift
The YT comes with either mechanical or hydraulic side shift.
To use the hydraulic side shift connect the hoses to the double acting spool valve
on the tractor.
Keep all moving parts well lubricated to minimise wear.
When in the eld always lift the machine o the ground before operating the side
shift, to not do so will strain the machine and will cause breakage.
To Next Page
Loading...
