Conceptronic CIPCAM720PTIWL - Date and time configuration; Initialize and reset options; System log review

21
before purchasing the SD Card.
3.5.2. Date and time setting
Click SYSTEM SET->>SYSTEM->>Time Settings to access it.
Figure 28
Example of figure 28, please select the time zone at first and then select a NTP server
and obtain time from network time server.
3.5.3. Initialize setting
Click SYSTEM SET->>SYSTEM->>Initialize to access it.
Figure 29
If you click “Confirm” of Backup setting data, the camera will create a file, you can store it
to your computer, and you can directly call this file to restore the settings. The function
helps to manage the cameras and no need to do all the settings again.
The firmware upgrade is for updating system firmware and web UI.
3.5.4. System Log
Click SYSTEM SET->>SYSTEM->>System Log to access it.