1. Product introduction
Main features:
Monitor your home or office from anywhere in the world
Built-in Infrared LEDs for night viewing
Supports motion detection and event notification via e-mail or FTP
Digital input/output (1DI/1DO) for sensor and alarm
Wireless security with WEP, WPA and WPA2 encryption
Supports iPhone/smartphone/PDA remote viewing over the Internet
Free 64-channel monitoring software included
Supports cloud functionality
2. Installation and Operation Guide
2.1. View video by mobile phone software
You need to download and install iSmartviewPro mobile phone client software from
attached CD, and then scan QR code on the camera body to add camera for viewing video, for
detail, please see “Product Quick Application Guide”.
2.2. View video by wired connection in LAN
Power on the IP camera（please check carefully the voltage of power adaptor, don’t
insert incorrect power, otherwise it will be damaged）, connect IP camera to router by
network cable and connect computer to the same router, example of figure 1.
Figure 1
To Next Page
Loading...