Conceptronic CIPCAMPTIWL - Visit the Camera from LAN; LAN connection; Search and set the IP address of the Camera; Visit IP Camera

CIPCAMPTIWL User Manual
7
3 Visit the Camera from LAN
3.1 LAN connection
Figure 3
3.2 Search and set the IP address of the Camera
Run “BSearch_en.exe” in the CD, the setting interface as figure 4.
Figure 4
Operation Steps:
1) Click “Search (F3)
2) Choose the device
3) Change the IP address of camera according to the information in the red frame on
the left. The numbers in the red circle should not be the same.
4) Put the user name and password into “Authentication” (By default, the user name
is: admin, password is: 123456).
5) Click “Update”