Conceptronic CM3PVR - Instructions Manual

Copyright
®
2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 3
Conceptronic CM3PVR – DVD Playback & AVI Subtitle Instructions
for firmware version 038 and later versions
A. DVD Playback Instructions
From firmware version 038, the CM3PVR supports DVD Playback functionality.
To play DVD files from the CM3PVR, follow the instructions below:
1. Create a folder on the CM3PVR hard disk in the 'VIDEO' folder with the name of your DVD movie (for example:
'Movie1').
2. Copy the 'AUDIO_TS' and 'VIDEO_TS' including content from your DVD to the created folder (for example:
‘Movie1’) on the CM3PVR.
After copying, the structure should be:
- VIDEO
|-> Movie1
|-> AUDIO_TS (optional)
|-> VIDEO_TS (with all the DVD files inside)