Conceptronic cm3pvrd - Audio and A;V Connectivity; Connecting the Audio Cable(s)

ENGLISH
37
Connecting the Audio Cable(s)
You can connect the unit to your TV and/or your home cinema system in 2 different ways:
- Analog, through the RCA Audio Jacks of the A/V Output
- Digital, Through the Coaxial Digital SPDIF Output
Analog:
• Connect the Audio Jacks (Red, White) of the Composite cable to the RCA Audio Jacks of the A/V Output.
• Connect the other end of the Composite cable to the RCA Audio Jacks of your TV or Receiver.
Digital:
• Connect the Digital Coaxial cable to the Digital Coaxial Output of the unit.
• Connect the other end of the Digital Coaxial cable to the Digital Coaxial Input of your Receiver.
Connecting other Audio/Video Equipment
You can connect an Audio/Video source, like a VCR, DVD Player or Set-Top Box to the unit so you can
record from the Audio/Video source.
• Connect the Audio/Video cable delivered with your Audio/Video device to the corresponding AV Output
jacks on the Audio/Video device.
• Connect the other side of the Composite cable (Yellow, Red, and White) to the AV Input jacks of the
unit.